larger than the value will be fragmented. If you have decreased
this value and experience high packet error rates, you can
increase it again, but it will likely decrease overall network
performance. Select a setting within a range of 256 to 2346 bytes.
Minor change is recommended.
Channel
This setting is only available for Ad Hoc mode. Select the number
of the radio channel used for the networking. The channel setting
should be the same with the network you are connecting to.
3.2.1.2 Authentication and Security
Parameter Description
Authentication Type
This setting has to be consistent with the wireless networks that
the card intends to connect.
Open
– No authentication is needed among the wireless network.
Shared
– Only wireless devices using a shared key (WEP Key
identified) are allowed to connecting each other.
Authentication Type
LEAP
– LEAP is a pre-EAP, Cisco-proprietary protocol, with many
of the features of EAP protocols. Cisco controls the ability of other
14
Содержание WML-8315
Страница 1: ...802 11g Wireless MIMO PCI Adapter WML 8315 User s Manual...
Страница 12: ...8...
Страница 31: ...D Select Advanced page enable the WMM Capable 27...