Planet WML-8315, Руководство пользователя

Страница: 10 / 35

2.2 Hardware Installation
Installation Procedure
A. Turn off your computer and remove its cover.
B. Insert the PCI card to an available PCI slot firmly.
C. Secure this card to the rear of the computer chassis and put back the cover.
D. Secure the antenna to the antenna connector of the card.
E. Turn on the computer.
Guidelines for the Hardware Installation
Please observe the following guidelines when you are installing the PCI card to the Desktop PC:
y
Avoid placing the PC close to obstacles
Obstructions such as concrete walls and thick metals limit radio signal penetration and reduce the
throughput and the coverage range of the PCI card.
y
Place the PC as high as possible
The higher the PC is placed, the better the performance.
y
Adjust the antenna position
The card has two antennas for signal reception and one antenna for high power signal transmission.
The antennas on the right and left side are for signal reception and should be set perpendicular (90
degrees) to each other. The central one is for signal transmission and should be pulled up about 45
degree. Please refer to the illustration below:
6