background image

 

Copyright 

Copyright 

ã

 2004 by PLANET Technology Corp. All rights reserved. No part of this publication may be 

reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or 

computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, 

manual or otherwise, without the prior written permission of PLANET. 

PLANET  makes  no  representations  or  warranties,  either  expressed  or  implied,  with  respect  to  the 

contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular 

purpose. Any software described in this manual is sold or licensed "as is". Should the programs prove 

defective  following  their  purchase,  the  buyer  (and  not  this  company,  its  distributor,  or  its  dealer) 

assumes  the  entire  cost  of  all  necessary  servicing,  repair,  and  any  incidental  or  consequential 

damages resulting from any defect in the software. Further, this company reserves the right to revise 

this publication  and  to  make changes from  time  to  time  in the  contents  hereof  without  obligation  to 

notify any person of such revision or changes.

All brand and product names mentioned in this manual are trademarks and/or registered trademarks of 

their respective holders. 

Federal Communication Commission Interference Statement   

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital  device, 

pursuant to Part 15 of FCC Rules.    These limits are designed to provide reasonable protection against 

harmful  interference  in  a  residential  installation.    This  equipment  generates,  uses,  and  can  radiate 

radio frequency energy and, if not installed and used in accordance with the instructions, may cause 

harmful interference to radio communications.    However, there is no guarantee that interference will 

not  occur  in  a  particular  installation.    If  this  equipment  does  cause  harmful  interference  to  radio  or 

television  reception,  which  can  be  determined  by  turning  the  equipment  off  and  on,  the  user  is 

encouraged to try to correct the interference by one or more of the following measures:     

1.  Reorient or relocate the receiving antenna. 

2.  Increase the separation between the equipment and receiver. 

3.  Connect  the  equipment  into  an  outlet  on  a  circuit  different  from  that  to  which  the  receiver  is 

connected. 

4. 

Consult the dealer or an experienced radio technician for help.

 

FCC Caution:   

To  assure  continued  compliance.(example-use  only  shielded  interface  cables  when  connecting  to 

computer or peripheral devices). Any changes or modifications not expressly approved by the party 

responsible for compliance could void the user

s authority to operate the equipment. 

This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the  Following  two 

conditions: (1) This device may not cause harmful interference, and (2) this Device must accept any 

interference received, including interference that may cause undesired operation. 

Содержание WL-U356





























Отзывы: