VRT-401 User Manual
60
Define Firewall Rule
Clicking the "Add" button in the
Firewall Rules
screen will display a screen like the
example below.
Figure 38: Define Firewall Rule
Data - Define Firewall Rule Screen
Name
Enter a suitable name for this rule.
Type
This determines the source and destination ports for traffic
covered by this rule. Select the desired option.
Source IP
These settings determine which traffic, based on their
source IP address, is covered by this rule.
Select the desired option:
•
Any - All traffic from the source port is covered by this
rule.
•
Single address - Enter the required IP address in the
"Start IP address" field". You can ignore the "Subnet
Mask" field.
•
Range address - If this option is selected, you must
complete both the "Start IP address" and "Finish IP ad-
dress" fields. You can ignore the "Subnet Mask" field.
•
Subnet address - If this option is selected, enter the
required mask in the "Subnet Mask" field.
