background image

VRT-401 User Manual 

30 

Data - Status Screen 

Internet 

Connection Method 

This indicates the current connection method, as set in the 
Setup Wizard. 

Broadband Modem 

This shows the connection status of the modem. 

Internet Connection 

Current connection status: 

• 

Active 

• 

Idle 

• 

Unknown 

• 

Failed 

If there is an error, you can click the "Connection Details" 
button to find out more information. 

Internet IP Address 

This IP Address is allocated by the ISP (Internet Service 
Provider). 

"Connection De-
tails" 
Button 

Click this button to open a sub-window and view a detailed 
description of the current connection. Depending on the 
type of connection, a "log" may also be available. 

LAN 

IP Address 

The IP Address of VRT-401. 

Network Mask 

The Network Mask (Subnet Mask) for the IP Address 
above. 

DHCP Server 

This shows the status of the DHCP Server function - either 
"Enabled" or "Disabled".  

For additional information about the PCs on your LAN, and 
the IP addresses allocated to them, use the 

PC Database

 

option on the 

Advanced

 menu. 

System 

Device Name 

This displays the current name of VRT-401. 

Firmware Version 

The current version of the  firmware installed in VRT-401. 

"System Data" 
Button 

Clicking this button will open a Window which lists all sys-
tem details and settings. 

Buttons 

Connection Details 

View the details of the current Internet connection. The sub-
screen displayed will depend on the connection method 
used. See the following sections for details of each sub-
screen. 

System Data 

Display all system information in a sub-window. 

Restart Router 

Restart (reboot) the Router. You will have to wait for the 
restart to be completed before continuing. 

Refresh Screen 

Update the data displayed on screen. 

 

Содержание VRT-401






























































































































Отзывы: