VRT-401 User Manual
10
2. Start your WEB browser.
3. In the
Address
box, enter "HTTP://" and the IP Address of VRT-401, as in this
example, which uses VRT-401’s default IP Address:
HTTP://192.168.0.1
If you can't connect
If VRT-401 does not respond, check the following:
•
VRT-401 is properly installed, LAN connection is OK, and it is powered
ON. You can test the connection by using the "Ping" command:
•
Open the MS-DOS window or command prompt window.
•
Enter the command:
ping 192.168.0.1
If no response is received, either the connection is not working, or
your PC's IP address is not compatible with VRT-401’s IP Address.
(See next item.)
•
If your PC is using a fixed IP Address, its IP Address must be within the
range 192.168.0.2 to 192.168.0.254 to be compatible with VRT-401's
default IP Address of 192.168.0.1. Also, the
Network Mask
must be set
to 255.255.255.0. See
Chapter 4 - PC Configuration
for details on
checking your PC's TCP/IP settings.
•
Ensure that your PC and VRT-401 are on the same network segment.
(If you don't have a router, this must be the case.)
4. You will be prompted for a username and password, as shown below.
Figure 5: Password Dialog
•
Enter admin for the User Name, and leave the Password blank.
•
Both the name and password can (and should) be changed, using the
Admin
Login
screen.
