9
Keypad Description
Handset top cradle
For the placement of handset
(Receiver end)
Hook switch
For hang-up and hang-off of handset
Cradle latch
To prevent the handset from dropping when it is wall-mounted.
Handset bottom cradle
For the placement of handset (Transmitter end)
Handset cord port
RJ-11 jack on the left side of the IP phone
Headset wire port
RJ-11 jack on the bottom of the handset
1
Headset To mount
mouthpiece and earpiece on the single handle
2
LCD screen
The LCD screen is for displaying
your settings, such as IP address of
Internet port, phone number, and call
status and so on.
3
Multi-Functional
Key
These keys can be used as speed dial, BLF, shortcut key, pick up and call
park.
4
Line Keys/ Soft keys
These keys are used as line keys; you can press the line button to select
the corresponding line, and then user can make call or do other functions.
The LEDs under the keys used to display the status of each extension,
please refer to 3 LCD indicator depends on their corresponding content
displayed on the LCD at that time.
MSG
The key can be used for voicemail selection, press it to access voicemail
(must be set up by your phone administrator) The LED is to indicate
voicemail status.
Menu
Press it to access to menu items: such as phonebook, multi-functional
key, and call history and so on.
Redial
The Redial key is used to redial the last dialed number automatically.
5
Handsfree / Headset
This button has two operating mode: Hands free and headset.
Change the value of Handsfree Key Mode parameters in
Phone/Preference webpage, Miscellaneous columns. The LED
associated is used to indicate its status
6
Numeric Keypad
Enters numeric digits for initiating a call or for entering configuration
information
XFER
The Transfer key is used to transfer a call to another IP phone
7
Hold
The Hold key is used to hold the current call, press it again to release the
