High Definition Color PoE IP Phone with Dual Display
VIP-2140PT
40
Call Ended
When user finishes the call, user can put the handset back to the device to hang up the call or press the
hands-free button to close the audio channel to hang up.
When the call is held or in holding state, the user must press the [Resume] button to return to
call mode, or putting the handset back to the device or pressing the speaker-free button to
hang up is not available.
5.2 Make/Receive Second Call
The device can support up to two concurrent calls. When there is already a call established, user can still
answer another incoming call on either lines or make a second call on either lines.
Second Incoming Call
When there is another incoming call during talking a phone call, this call will be waiting for user to answer it.
User will see the call message in the middle of the current screen. The device will not be ringing but playing
call waiting tone in the audio channel of the current call and the LED will be flashing in green. User can accept
or reject the call which is the same as normal incoming call. When the waiting call is answered, the first call
will be put on hold automatically.
Figure 39 - Second Incoming Call Screen
Second Outgoing Call
To make a second call, user may press the [XFER] / [Conf] button to make a new call on the default line or
press the line key to make new call on a specific line. Then dial the number the same way as making a phone
call. Another alternative for making second call is to press the DSS Keys dialing out from the configured Keys
(BLF/Speed Dial). When user is making a second call with the above methods, the first call could be placed
on hold manually first or will be put on hold automatically at the second dial.
