High Definition Color PoE IP Phone with Dual Display
VIP-2140PT
75
Parameters
Description
Ring From Headset
Enable Ring From Handset by selecting it; the phone plays ring tone
from handset.
Enable Intercom
When intercom is enabled, the device will accept the incoming call
request with a SIP header of Alert-Info instruction to automatically
answer the call after specific delay.
Enable Intercom Mute
Enable mute mode during the intercom call
Enable Intercom Tone
If the incoming call is intercom call, the phone plays the intercom tone
Enable Intercom Barge
Enable Intercom Barge by selecting it; the phone auto answers the
intercom call during a call. If the current call is intercom call, the phone
will reject the second intercom call.
Emergency Call Number
Configure the Emergency Call Number. Despite the keyboard is locked,
you can dial the emergency call number.
Enable Password Dial
Enable Password Dial by selecting it. When number entered is
beginning with the password prefix, the following N numbers after the
password prefix will be hidden as *, N stand for the value which you
enter in the Password Length field. For example, you set the password
prefix is 3, enter the Password Length is 2, then you enter the number
34567, it will display 3**67 on the phone.
Encryption Number Length
Configure the Encryption Number length.
Password Dial Prefix
Configure the prefix of the password call number.
Restrict Active URI Source
IP
Set the device to accept Active URI command from specific IP address.
This feature is usually used for device management and
will be described in “VIP-2140PT Administration Guide”.
Push XML Server
Configure the Push XML Server; when phone receives request, it will
determine whether to display corresponding content on the phone
which sent by the specified server or not.
Allow IP Call
If enabled, user can dial out with IP address.
Enable Multi Line
Enable phone to make calls for 10 lines max, or disable for 2 lines max.
Enable Default Line
If enabled, user can assign default SIP line for dialing out rather than
SIP1.
Enable Auto Switch Line
Enable phone to select an available SIP line as default automatically.
DND Response Code
Set the SIP response code on call rejection on DND.
Busy Response Code
Set the SIP response code on line busy.
Reject Response Code
Set the SIP response code on call rejection.
Play Talking DTMF Tone
Play DTMF tone on the device when user pressed a phone digits during
taking; default enabled.
