The previous command would apply the follow settings for the Switch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 5-2
Set IP address screen
5. Repeat Step 1 to check if the IP address is changed.
n
Store current switch configuration
6. On
“Switch(config)#”
prompt, enter the following command and press
<Enter>
.
Switch(config)# copy running-config startup-config
If the IP address is successfully configured, the VDSL2 Managed Switch will apply
the new IP address setting immediately. You can access the Web interface of the
VDSL2 Managed Switch through the new IP address.
Note
1. System will use previous setting if you did not copy the running-
config to startup-config.
2. If you do not familiar with console command, enter “help”
anytime in console to get the help description.
