10
3.3 Remote Management
The function can enable users to manage the security router at remote sites and to
allow technical person to assist you in solving network problem.
Step 1.
Go to
Firewall
General Policy
.
Figure 3-6
The firewall setting button
Figure 3-7
General Policy setting page
Step 2.
Click
Enable
to active Remote Management. And then enter the control
port you want to use. The default value is
8080
.
Step 3.
Click
Apply
to save the configuration. And you can type the
http://WAN
IP address: 8080
to access the router from the remote side.
