9
Chapter 4 Encrypting Your Powerline Network
4.1 PowerPacket Configuration Utility Installation
1. Insert the CD-ROM into the CD-ROM drive to initiate the autorun program. Once completed,
a menu screen will appear as follows:
2. To install the utility, click on the
"PowerPacket Configuration Utility"
hyperlink to activate
the installation procedure for the application program.
If the above screen is not shown, you can start the installation as follows.
•
Click on
Start Menu/ Run.
•
Enter
“
E:\Utility\PL-102U\setup.exe
”
in the appeared box, where
“
E
”
is the letter of your
CD-ROM drive.
Click on
“
OK
”
button.
3. On the
Welcome
screen, click the
Next
button.
