Planet NAS-7450 Скачать руководство пользователя страница 89

Страница: 89 / 111

Scan Settings” on Section 11-3.

2. Click the “Manual”

tab to go to the manual scanning page.

3. Click the “Select Folders”

hyperlink to specify the folders you want to perform the manual

scan.

4. Click “Apply”

to save the settings.

Configuring Schedule Scanning

1. Click the “Enable Scheduled Scan for Infected Files” checkbox to enable scheduled

scanning.

2. Click the “Select Folders”

hyperlink to specify the folders you want to perform the scheduled

scan.

3. Configure the start time and recurrence pattern for the scheduled scanning.

4. Click “Apply”

to save the settings.

10.3 Configuring Scan Settings

All virus scan has two options that need to be configure.

￭

File Type to Scan – you can limit scanning to specific file types.

￭

Action When Virus Found – three actions (quarantine, clean, delete) can be chose from

when virus is found

File Types to Scan

Содержание NAS-7450
















































































































Результаты поиска

Содержание NAS-7450

Отзывы:

Planet NAS-7450, Руководство пользователя, Страница: 89 / 111

Результаты поиска

Содержание NAS-7450

Отзывы: