Planet NAS-7450 Скачать руководство пользователя страница 43

Страница: 43 / 111

Item

Description

JBOD

Just a Bunch Of Disks.

A JBOD-type volume contains only one hard disk as its member.

RAID 0

RAID level 0 is disk striping only, which distribute data evenly over multiple

disks for better performance. It does not provide safeguards against failure.

RAID level 0 uses two or more hard disks.

RAID 1

RAID level 1 uses disk mirroring, which provides 100% duplication of data. It

offers high reliability, but doubles storage cost. RAID level 1 uses two hard

disks.

RAID 5

RAID level 5 distributes data and parity bits over multiple disks for both

performance and fault tolerance. A RAID volume can still work when a hard disk

fails. RAID level 5 uses three or more hard disks. Building a RAID-5 volume

may take hours depending on capacity.

RAID 6

RAID 6 (striped disks with dual parity) combines four or more disks in a way

that protects data against loss of any two disks.

RAID 10

RAID 1+0 (or 10) is a mirrored data set (RAID 1) which is then striped (RAID 0),

hence the “1+0” name. A RAID 1+0 array requires a minimum of four drives –

two mirrored drives to hold half of the striped data, plus another two mirrored for

the other half of the data. In Linux, MD RAID 10 is a non-nested RAID type like

RAID 1 that only requires a minimum of two drives and may give read

Содержание NAS-7450
















































































































Результаты поиска

Содержание NAS-7450

Отзывы:

Planet NAS-7450, Руководство пользователя, Страница: 43 / 111

Результаты поиска

Содержание NAS-7450

Отзывы: