Planet NAS-7450 Скачать руководство пользователя страница 47

Страница: 47 / 111

For NAS-7450 rack mount model:

1. Identify which hard disk fails. The amber LED2 will blink to indicate hard disk failure.

2. Unplug the HDD tray and replace the HDD with a good one.

3. Plug in the HDD tray. Wait until the Green LED is steady on.

Then you are done.

5.9 iSCSI

iSCSI

, (Internet Small Computer System Interface), an Internet Protocol (IP)-based storage

networking standard for linking data storage facilities. By carrying SCSI commands over IP

networks, iSCSI is used to facilitate data transfers over intranets and to manage storage over

long distances. iSCSI can be used to transmit data over local area networks (LANs), wide area

networks (WANs), or the Internet and can enable location-independent data storage and

retrieval.

Follow the steps below to configure the iSCSI target service on the NAS
server.

Содержание NAS-7450
















































































































Результаты поиска

Содержание NAS-7450

Отзывы:

Planet NAS-7450, Руководство пользователя, Страница: 47 / 111

Результаты поиска

Содержание NAS-7450

Отзывы: