IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
-
42
-
Parameters
Description
Re-Ping time (Min.)
The delay time for re-executing PING detection when the network
device is on after network device reboots.
4.2.5
Monitor (Only for IPM-8220)
This function provides the ability to set power outlet current value, real-time off of power outlet in case
of any current abnormality to avoid any damage to the devices connected with the outlet.
Parameters
Description
Overload
Current value of the overload power, alarms will be given when the
input power current exceeds this alarm value.
High alarm
Current value to be alerted when the power outlet current is too high.
Low alarm
Current value to be alerted when the power outlet current is too low.
4.2.6
Peripheral
You may set up peripheral at this tab to monitor device and command it with On, Off, Reboot and Short
on; set up different conditions with different peripheral types.
Parameters
Description
Name
Add peripheral name.
Operation type
As the peripheral matches, it would perform the action for On, Off,
Reboot or Short on.
SNMP Trap name
The Name shows up when sending alarm. English and number are
only accessible.
Monitor
Check this item and the system would perform peripheral monitoring.
