IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
-
38
-
Parameters
Description
Monitor Off-line
:
“Offline Monitor” is checked. Humidity
Probe is not connected to PDU now.
Non-Monitor Normal
:
“Offline Monitor” is not checked. And
external humidity is not higher than “High Alarm” or lower
than “Low Alarm” setting.
Non-Monitor Alert
:
“Offline Monitor” is not checked. And
external humidity is higher than “High Alarm” or lower than
“Low Alarm” setting.
Non-Monitor Off-line
:
“Offline Monitor” is not checked.
Humidity Probe is not connected to device now.
Move the mouse over the icons for its detailed information, and the
menu is displayed as follows:
RH
Refer to the humidity value detected by the current humidity sensor.
State dropdown
menu
This drop-down list offers four states for inquiry: "All", "Abnormal",
"Alert", and "Normal" that will be displayed as per the temperature
sensor state.
Setup
Name
: Humidity sensor name
High RH Alarm
: Set up the values of high RH alarm. When humidity
is higher than you set, the alarm will occur.
Low RH Alarm
: Set up the values of low RH alarm. When humidity is
lower than you set, the alarm will occur.
Offline Monitor:
Check to enable to monitor system. When humid is
higher than you set, device will sent alerts via email.
4.1.6
Daisy Chain
Display another connected switched IPM and status.
