IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
-
29
-
Parameters
Description
Name
Description of each power infeed.
Status
Each light signal has three states: "Normal", "Alert" and "No Access".
Monitor Normal
: “Offline Monitor” is checked. And external
temperature is not higher than “High Alarm” or lower than “Low
Alarm” setting.
Monitor Alert
: “Offline Monitor” is checked. And external
temperature is higher than “High Alarm” or lower than “Low Alarm”
setting.
No Access
: Means user does not have any authority to operate
the infeed.
Move the mouse over the signal light for its detailed information, and
the menu is displayed as follows:
Total
Display the total current consumption of the device.
Voltage
Display the voltage of the current input power.
Power
Display the consumption power value of the current input power.
Frequency
Display the voltage frequency of current input power.
Power factor
Display the power factor of current input power.
KWh
Display the consumption watt-hour of the device since the last
zeroing.
State dropdown
menu
It provides four methods for users to check up infeed status: All,
abnormal, warning and normal. Relevant info would show as
correspondence event has been chosen.
Setup
Press "Setup" and the window for setting the input power of this
circuit will be shown.
