![Planet ICA-4500V Скачать руководство пользователя страница 17](http://html.mh-extra.com/html/planet/ica-4500v/ica-4500v_user-manual_1562448017.webp)
5 Mega-Pixel 20M IR Vari-Focal Dome IP Camera
ICA-4500V
17
RJ-45
(LAN socket, PoE )
Connect to PC or Hub/Switch.
For connecting to 10Base-T Ethernet or 100Base-TX or 1000Base-T
Fast Ethernet / Gigabit Ethernet cabling. This Ethernet port built
auto-negotiation protocol can detect or negotiate the transmission
speed of the network automatically. Please use CAT-5 or above cable to
connect the Network Camera to a 100/1000Mbps Fast/Gigabit Ethernet
network switch.
ONLY use one power source, either from DC or from
802.3af Power over Ethernet.
12VDC in & Power
GND
The input power is DC 12V, 1A.
ONLY use package power adapter supplied with the
internet. Otherwise, the product may be damaged.
MIC in
(Audio in)
Connect an external microphone to the camera.
Audio out +/-
Connect a loud speaker to the camera. This function is for voice alerting
and two-way audio.
Video out
Connect a TV monitor to the camera. User can check the focus/zoom
and view angle of the camera.
DI/GND/DO/RS485
The 6 pin terminal block includes 1 input port and 1 output port, and
RS-485 D+ and D-.
Factory Default
Reset
This button is used to restore the all factory default settings.
Restore the device:
a. Press the button down continuously.
b. Hold the button at least 5 seconds and release it. Then the device has
been restored to default settings and reboot again.
Micro SD Card Slot
User can insert a micro SD card into this slot for recording.
That to cabling this camera by type of connector board, firstly, user must remove the
attached “connector cable” from wafer 1~ 6 shown as below: