Planet HDP-1160PT Скачать руководство пользователя страница 40

Страница: 40 / 62

720p SIP Vandalproof Door Phone with PoE

HDP-1160PT

SIP

Field Name

Description

In-band

RFC2833

SIP_INFO

AUTO

Different service providers may offer different models

DTMF SIP INFO Mode

When the device's DTMF type is set to SIP_INFO

The DTMF_SIP_INFO type is configured to send */#, and when the device

presses the */# key, the actual value sent is */#;

Configured to send 10/11, when the device presses the */# key, the actual

value sent is 10/11.

Transportation Protocol

Set the line to use TCP or UDP for SIP transmission.

Local Port

Set the Local Port.

SIP Version

Set the SIP version.

Caller ID Header

Set the Caller ID Header.

Enable Strict Proxy

Enables the use of strict routing. When the phone receives packets from

the server, it will use the source IP address, not the address in via field.

Enable user=phone

Sets user=phone in SIP messages.

Enable SCA

Enable/Disable SCA (Shared Call Appearance ).

Enable DNS SRV

Set the line to use DNS SRV which will resolve the FQDN in proxy server

into a service list.

Keep Alive Type

Set the line to use dummy UDP or SIP OPTION packet to keep NAT

pinhole opened.

Keep Alive Interval

Set the keep alive packet transmitting interval.

Enable Session Timer

Set the line to enable call ending by session timer refreshment. The call

session will be ended if there is not new session timer event update

received after the timeout period.

Session Timeout

Set the session timer timeout period.

Enable Rport

Set the line to add rport in SIP headers.

Enable PRACK

Set the line to support PRACK SIP message.

Enable DNS SRV

Set the line to use DNS SRV which will resolve the FQDN in proxy server

into a service list.

Auto Change Port

Enable/Disable Auto Change Port.

Keep Authentication

Keep the authentication parameters from previous authentication.

Auto TCP

Using TCP protocol to guarantee usability of transport for SIP messages

above 1500 bytes.

Enable GRUU

Support Globally Routable User-Agent URI (GRUU).

Содержание HDP-1160PT































































Результаты поиска

Содержание HDP-1160PT

Отзывы:

Planet HDP-1160PT, Руководство пользователя, Страница: 40 / 62

Результаты поиска

Содержание HDP-1160PT

Отзывы: