720p SIP Vandalproof Door Phone with PoE
HDP-1160PT
17
Chapter 3. Web-based Management
Please take a few minutes to read through this guide to familiarize with the steps required to set up your door
phone. This chapter provides setup details of the door phone Web-based Interface.
3.1 Introduction
When the device and your computer successfully connect to the network, enter the IP address of the device.
You will see the Webpage management interface login screen. Enter the user name and password and click
the button to enter the settings screen.
Door phone
can be configured with your Web browser. Before configuring, please make sure your PC is in the
same IP segment as the
door phone.
3.2 Web Configuration
The login username and password are
admin
and
123
, respectively.
Enter “admin” for user name and “123” for password to access
interface.
3.3 SIP Configuration
At least one SIP line should be configured properly to enable the telephony service. The line configuration is
like a virtualized SIM card. Just like a SIM card on a mobile phone, it stores the service provider and the
account information used for registration and authentication. When the device is applied with the configuration,
it will register the device to the service provider with the server’s address and user’s authentication as stored