19
Figure 3-22
The Port Setting page
Press the port ID to configure each port
’
s speed, flow control, QoS priority and link status. The screen in Figure 3-23
appears.
Figure 3-23
The
Per
Port Setting page
The options and descriptions of Port Settings show as below:
Speed:
this function provides six modes
—
100M Full, 100M Half, 10M Full, 10M Half, Auto and Disable
Flow Control:
this setting determines whether or not the Switch will be handling flow control. Set Flow Control to enable for
avoiding data transfer overflow. Or it sets to disable; there is either no flow control or other hardware/software
management. When the port is set to forced mode, then the flow control will automatically set to disable.
QoS:
In some ports that need to have a high priority to deal with the data transfer, QoS should be change. The default
setting of all port QoS is
Normal
, set the QoS to
High
where the
ports have a high priority of transferring data.
@
Note
:
When set each port to run at 100M Full, 100M Half, 10M Full, and 10M Half-speed modes. The
Auto-MDIX function will disable.
