-28-
Figure 4-13
Loop Back Test screen
The Loop Back Test Parameters includes the following fields:
•
Send Packet
Number
Enter the
number of loop back test packet to send.
0~255: (default 16)
•
Result
PC reports the loop back test result after sending all test frames.
The possible values are :
PASS
and
Fail
•
Result Counter
Shows
number of good looped-back packet received
"
Note
:
These counters will be cleared when a new auto loop back test procedure is issued
After field the parameter and press “
Apply
” to execute the Loop Back Test function. The result shows at the next table. As
the Figure 4-14 screen appears.
Figure 4-14
Ping Result screen
"
Note
:
Be sure the partner converter had enabled the
Loop Back Reply
. Otherwise, the result screen will
as like fiber above.