-17-
4.3 Port Configuration
This function allows displaying each port’s status. The Link Status
in the screen displays the current connection speed and
duplex mode; else this function will show
down
when the port is disconnected. Press the
“Refresh”
button to renew the
screen. The screen in Figure 4-5 appears.
Figure 4-5
Port Configuration screen
The page includes the following configurable data:
•
Port
Indicate the Copper port and Fiber port
•
Link
Displays the current connection speed and duplex mode of Copper or Fiber
•
Mode
Allow configuring the port speed and operation mode. Draw the menu bar to
select the mode.
•
Auto Speed
- Setup Auto negotiation.
•
10 half
- Force sets 10Mbps/Half-Duplex mode.
•
10 Full
- Force sets 10Mbps/Full-Duplex mode.
•
100 half
- Force sets 100Mbps/Half-Duplex mode.
•
100 full
- Force sets 100Mbps/Full-Duplex mode.
•
Disable
- Shutdown the port manually.
Default value:
Auto Speed
•
Flow Control
Allow
Enable
or
Disable
flow control for selected port.
•
Enable
– 802.3x flow control is enabled on Full-Duplex mode or
Backpressure is enabled on Half-Duplex mode
•
Disable
– No flow control or backpressure function on no matter
Full-Duplex or Half-Duplex mode
Default value:
Disable
•
Ingress Rate Limit
The value of inbound traffic limitation in kilobit-per-second (kbps). The possible
values are :
•
No Limit
•
512K
•
1M
•
2M
•
4M
•
8M
•
10M
•
50M