background image

 

6.1.1 System 

 

 

Function 

Description 

Print Server Name

 

This option allows you to view device name of the print server. To correct the print 
server’s device name. 

System Contact

 

This option allows you to view contact name of the print server. To check the print 
server’s contact name who in charge of this device. 

System Location

 

This option allows you to view Location name of the print server. To confirm the print 
server’s location name where the print server is located in the office’s LAN. 

System Up Time 

This option allows you to view uptime of the print server. When you start the print 
server, it will compute the print server from start time to power off time. 

Firmware Version 

This option allows you to view firmware version of the print server. To verify the print 
server’s firmware version is newer in this time. 

MAC Address 

This option allows you to view Node ID of the print server. The Node ID is unique from 
any print server. 

Email Alert 

This option allows you to view the status of Email Alert feature. 

View Print Jobs 

This option allows you to view all the print jobs sent by any network user. When you 
click the hyper link, you will see the dialog box as below. 

 

                                                                                            27 

 

Содержание FPS-3300








































































Отзывы: