Planet FPS-1PW Скачать руководство пользователя

Страница: 13 / 87

Page 9

DIP Switch Table

Some models are fitted with DIP switches.

•

The default position for all switches is UP.

•

Normally, there is no need to change the settings of the DIP switches.

•

The purpose of these switches is described in the following tables. Any other possible
settings are reserved, and should not be used.

Print Servers (FPS-5P-M, FPS-5P-S)

SW1

SW2

SW3

Description

Auto select LAN connection (Default)
Switches 2 and 3 have no effect

Down

10BaseT - Half Duplex

Down

10BaseT - Full Duplex

Down

100BaseT - Half Duplex

Down

100BaseT - Full Duplex

Diagnostic Push Button

Print Server models FPS-1PW and FPS-1UW are fitted with a Diagnostic Push Button. The
button is recessed; a pin or paper clip can be used to press it. This button has 2 functions:

•

Restore the factory default settings

•

Print a test page containing all current settings.

To restore the factory default settings:

1. Turn the Print Server OFF.

2. Press and hold the diagnostic button. While pressing the button, switch the Print Server

ON.

3. If you continue pressing the button for 10 seconds, a diagnostic page will be printed,

showing the new (default) settings.

To generate a Diagnostic print out

1. Ensure that both the Print Server and the printer attached to port 1 are ON.

2. Press the diagnostic button, and hold it in for 2 seconds.

3. The test page, containing the current settings, will be printed.

Note:

PostScript printers are unable to print this page. If you have a PostScript printer on Port 1,
the test page will not be printed.

Содержание FPS-1PW
























































































Результаты поиска

Содержание FPS-1PW

Отзывы:

Похожие инструкции для FPS-1PW

Бренды по названию

Популярные бренды

Planet FPS-1PW, Руководство пользователя

Результаты поиска

Содержание FPS-1PW

Отзывы:

Похожие инструкции для FPS-1PW

Бренды по названию

Популярные бренды