Chapter 3 Configuration
25
The factory default is
rfc 1483-0
. If your ISP uses the same access protocol, please
click
Edit
to input other parameters as below. If your ISP does not use rfc 1483-0, you
can delete it by clicking
Delete
. Then you may click
Create
to create a connection to
your ISP to surf the Internet. The following page is then shown.
Select one of the access methods among the 5 listed items and click
Next
to configure
the right connection method. Please refer to the following description and Section 3.5
Information from ISP.
is a shortcut to the Quick Start page.