ADW-4302v2 User Guide
LAN Screen
Use the
LAN
link on the main menu to reach the LAN screen. An example screen is
shown below.
Figure 6: LAN Screen
Data - LAN Screen
TCP/IP
IP Address
IP address for the ADW-4302v2, as seen from the local LAN.
Use the default value unless the address is already in use or
your LAN is using a different IP address range. In the latter
case, enter an unused IP Address from within the range used by
your LAN.
Subnet Mask
The default value 255.255.255.0 is standard for small (class "C")
networks. For other networks, use the Subnet Mask for the LAN
segment to which the ADW-4302v2 is attached (the same value
as the PCs on that LAN segment).
DHCP Server
•
If Enabled, the ADW-4302v2 will allocate IP Addresses to
PCs (DHCP clients) on your LAN when they start up. The
default (and recommended) value is Enabled.
•
If you are already using a DHCP Server, this setting must be
Disabled, and the existing DHCP server must be re-
configured to treat the ADW-4302v2 as the default Gateway.
See the following section for further details.
•
The
Start IP Address
and
Finish IP Address
fields set the
values used by the DHCP server when allocating IP Ad-
dresses to DHCP clients. This range also determines the
number of DHCP clients supported.
See the following section for further details on using DHCP.
DHCP
What is DHCP
A DHCP (Dynamic Host Configuration Protocol)
Server
allocates a valid IP address to
a DHCP
Client
(PC or device) upon request.
•
The client request is made when the client device starts up (boots).
14
Содержание ADSL 2/2+ VPN Firewall Router ADW-4302A v2
Страница 1: ...ADSL 2 2 VPN Firewall Router ADW 4302A v2 ADW 4302B v2 User s Manual...
Страница 4: ......
Страница 59: ...Operation and Status 53...