Field
Description
Enable
Select it to use static IP routes.
Destination
Enter the IP address of the destination device.
Subnet Mask
Enter the subnet mask of the destination device.
Next Hop
Enter the IP address of the next hop in the IP route to
the destination device.
Metric
The metric cost for the destination.
Interface
The interface for the specified route.
Add Route
Click it to add the new static route to the
Static Route
Table
.
Update
Select a row in the
Static Route Table
and
modify the
parameters. Then click it to save the settings
temporarily.
Delete Selected
Select a row in the
Static Route Table
and click it
to
delete the row.
Show Routes
Click it, the
IP Route Table
appears. You can view a list
of destination routes commonly accessed by your
network.
Static Route Table A list of the previously configured static IP routes.
3.6.2.3 RIP
Click
RIP
in the left pane, the page shown in the following figure appears. If you are using
this device as a RIP-enabled router to communicate with others using Routing Information
Protocol (RIP), enable RIP. This page is used to select the interfaces on your devices that
use RIP, and the version of the protocol used.
48
Содержание ADE-4400
Страница 1: ...1 ADSL 2 2 4 port Router ADE 4400...
