background image

Field 

Description 

Attain DNS Automatically 

Select it, the router accepts the first received DNS 
assignment from one of the PPPoA, PPPoE or MER 
enabled PVC(s) during the connection establishment.

Set DNS Manually 

Select it, enter the IP addresses of the primary and 
secondary DNS server. 

Apply Changes 

Click it to save the settings of this page. 

Reset Selected 

Click it to start configuring the parameters in this 
page. 

 

3.5.1.2 IPv6 DNS 

Click 

IPv6 DNS

 in the left pane, the page shown in the following figure appears 

 

The following table describes the parameters and buttons of this page: 

Field 

Description 

Attain DNS Automatically 

Select it, the router accepts the first received DNS 
assignment from one of the PPPoA, PPPoE or MER 
enabled PVC(s) during the connection establishment.

Set DNS Manually 

Select it, enter the IP addresses of the DNS server 
1,2,3. 

Apply Changes 

Click it to save the settings of this page. 

Reset Selected 

Click it to start configuring the parameters in this 
page. 

 
 

3.5.1.3 DDNS 

Click

 DDNS 

in the left pane, the page shown in the following figure appears. This page is 

used to configure the dynamic DNS address from DynDNS.org or TZO. You can add or 
remove to configure dynamic DNS. 

                                                                                                                       37

Содержание ADE-4400


































































Отзывы: