Planet 802.11n Wireless PCI Express Adapter WNL-9500 Скачать руководство пользователя страница 7

Страница: 7 / 61

QoS function: Control the bandwidth required for different applications

Support of most popular operating systems including Windows 2000 / XP / 2003 server

and Vista

Smart Antenna Technology with 2 transmit and 3 receive antennas

1-2 Safety Information

In order to keep the safety of users and your properties, please follow the safety instructions:

1. This wireless network card is designed for indoor use only. DO NOT expose this network

card to direct sun light, rain, or snow.

2. DO NOT put this network card at or near hot or humid places, like kitchen or bathroom. Also,

do not left this wireless network card in the car in summer.

3. This network card is small enough to put in a child’s mouth, and it could cause serious injury

or could be fatal. If they throw the network card, the card will be damaged. PLEASE KEEP

THIS NETWORK CARD OUT THE REACH OF CHILDREN!

4. This network card will become hot when being used for long time (This is normal and is not

a malfunction). DO NOT put the network card on a paper, cloth, or other flammable objects

after the network card has been used for a long time.

5. There’s no user-serviceable part inside the network card. If you found that the network card

is not working properly, please contact your dealer of purchase and ask for help. DO NOT

disassemble the network card by your self, warranty will be void.

6. If the network card falls into water, DO NOT USE IT AGAIN BEFORE YOU SEND THE

CARD TO THE DEALER OF PURCHASE FOR INSPECTION.

7. If you smell something strange or even see some smoke coming out from the network card,

switch the computer off immediately, and call dealer of purchase for help.

Содержание 802.11n Wireless PCI Express Adapter WNL-9500






























































Результаты поиска

Содержание 802.11n Wireless PCI Express Adapter WNL-9500

Отзывы:

Похожие инструкции для 802.11n Wireless PCI Express Adapter WNL-9500

Бренды по названию

Популярные бренды

Planet 802.11n Wireless PCI Express Adapter WNL-9500, Руководство пользователя

Результаты поиска

Содержание 802.11n Wireless PCI Express Adapter WNL-9500

Отзывы:

Похожие инструкции для 802.11n Wireless PCI Express Adapter WNL-9500

Бренды по названию

Популярные бренды