Planet 802.11n Wireless ADSL 2/2+ Router ADN-4000 Скачать руководство пользователя страница 82

Страница: 82 / 91

[ADSL]

ADSL Firmware

Version:

This field displays current ADSL firmware version.

Line States:

This field displays the ADSL connection process and status.

Modulation:

This field displays the ADSL modulation status for G.dmt or

T1.413.

Annex Mode:

This field displays the ADSL annex modes for Annex A or

Annex B.

Downstream and

Upstream:

Status of SNR Margin, Line Attenuation and Data Rate

SNR Margin:

The amount of increased noise that can be tolerated while

maintaining the designed BER (bit error rate). The SNR

Margin is set by Central Office DSLAM. If the SNR Margin is

increased, bit error rate performance will improve, but the data

rate will decrease. Conversely, if the SNR Margin is

decreased, bit error rate performance will decrease, but the

data rate will increase.

Line Attenuation:

Attenuation is the decrease in magnitude of the ADSL line

signal between the transmitter (Central Office DSLAM) and

the receiver (Client ADSL Modem), measured in dB. It is

measured by calculating the difference in dB between the

signal power level received at the Client ADSL Router and the

reference signal power level transmitted from the Central

Office DSLAM.

Data Rate:

This field displays the ADSL data rate.

3.8.2 System Log

Go to

Status -> System Log

and you can see the system log file. Click “

Save Log

” to

save system log file.

The

System Log

displays data generated or acquired by routine system communication

with other devices, such as the results of negotiations with the ISP's computers for DNS

and gateway IP addresses. The device keeps a running log of events and activities

occurring on the Router. You can click

Save Log

to display a Windows File Download

dialog box that enables opening or saving the contents of the log to your PC. To remove

Содержание 802.11n Wireless ADSL 2/2+ Router ADN-4000




























































































Результаты поиска

Содержание 802.11n Wireless ADSL 2/2+ Router ADN-4000

Отзывы:

Похожие инструкции для 802.11n Wireless ADSL 2/2+ Router ADN-4000

Бренды по названию

Популярные бренды

Planet 802.11n Wireless ADSL 2/2+ Router ADN-4000, Руководство пользователя

Результаты поиска

Содержание 802.11n Wireless ADSL 2/2+ Router ADN-4000

Отзывы:

Похожие инструкции для 802.11n Wireless ADSL 2/2+ Router ADN-4000

Бренды по названию

Популярные бренды