User Manual of WDRT-730
-31-
Connection ID
Please input the connection ID here if the local ISP asks you to do so
or you can just leave it blank. (optional)
MTU
Please input the MTU value of your network connection here. If you
don’t know, please keep the default value.
BEZEQ-ISRAEL
If you are connecting to the BEZEQ network in Israel, please enable
this function.
Connection Type
You can select
Continuous
to keep the connection be always on. Or
select
Connect on Demand
, then you can configure
Idle Time Out
below to stop the connection when the network traffic is not sending
or receiving in a period of idle time. Or you can also select
Manual
.
Then click
Connect
or
Disconnect
buttons to connect or disconnect
to the ISP immediately.
Table 5-6
Sometimes the connection cannot be terminated although you specify a time to
Idle
Time Out
, since some applications are visiting the Internet continually in the
background.
5.2.2.5.
L2TP
If your ISP provides L2TP connection, please select L2
TP
. And enter the following parameters (
):