![background image](http://html1.mh-extra.com/html/planet-networking-and-communication/upoe-1600g/upoe-1600g_user-manual_1563895046.webp)
User’s Manual of UPOE-800G / UPOE-1600G
4.5.1 PoE Configuration
This section provides PoE (Power over Ethernet) Configuration and PoE output status of Ultra PoE Managed Injector Hub
as screen in
Figure 4-5-2
appears
. Table 4-5-2
describes the PoE Configuration object of Ultra PoE Managed Injector Hub.
Figure 4-5-2:
PoE Configuration Web Page Screen
Object
Description
System PoE Admin Mode
Allows user to disable / enable PoE function.
Power Supply
Displays PoE power supply status.
Power Limit Mode
Allows user to configure power limit mode, which can be chosen.
Consumption:
Based on the real device power consumption where PoE power is
delivered as system default setting is in this mode.
Allocation:
Users allow to assign how much PoE power to each port and the system
will reserve PoE power to PD.
Prevent system from being too hot that may cause damage. When PoE unit
temperature rises over the temperature threshold value, PoE power budget will be
reduced.
Over Temperature
Protection
Displays the current operating temperature of PoE chip unit 1.
PoE Temperature Unit 1
Displays the current operating temperature of PoE chip unit 2.
PoE Temperature Unit 2
Displays the current operating temperature of PoE chip unit 3. (UPOE-1600G only)
PoE Temperature Unit 3
Displays the current operating temperature of PoE chip unit 4. (UPOE-1600G only)
PoE Temperature Unit 4
Power Allocation
Displays the current total power consumption status.
46