![background image](http://html1.mh-extra.com/html/planet-networking-and-communication/upoe-1600g/upoe-1600g_user-manual_1563895027.webp)
User’s Manual of UPOE-800G / UPOE-1600G
27
1. Press
the
“Refresh”
button for the currently-connected devices in the discovery list and the screen is shown as
follows:
Figure 3-1-4:
Planet Smart Discovery Utility Screen
This utility shows all necessary information from the devices, such as MAC address, device name, firmware version and
device IP subnet address. It can also assign new password, IP subnet address and description of the devices.
After setup is completed, press the
“Update Device”
,
“Update Multi”
or
“Update All”
button to take effect. The
definitions of the 3 buttons above are shown below:
Update Device:
Use current setting on one single device.
Update Multi:
Use current setting on multi-devices.
Update All:
Use current setting on whole devices in the list.
The same functions mentioned above also can be found in
“Option”
tools bar.
By clicking the
“Control Packet Force Broadcast”
function, it allows you to assign new setting value to the Ultra PoE
Managed Injector Hub under a different IP subnet address.
Press the
“Connect to Device”
button and then the Web login screen appears in
Figure 3-1-2.
Press the
“Exit”
button to shut down Planet Smart Discovery Utility.