manualshive.com logo in svg

Planet Networking & Communication MGSD-10080F, Руководство пользователя

Поделиться
Скачать
Planet Networking & Communication MGSD-10080F Скачать руководство пользователя страница 146

User’s Manual of MGSW-MGSD Series 

 

Buttons 

: Click to add a new entry in mapping table. 

: Click to save changes. 

: Click to undo any changes made locally and revert to previously saved values.

 

Auto-refresh 

: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.

 

: Click to refresh the page immediately.

 

 

 

4.6.12 Protocol-based VLAN Mambership 

This page allows you to map a already configured Group Name to a VLAN for the switch. The Group Name to VLAN Mapping 

Table screen in 

Figure 4-6-22

 appears. 

 

Figure 4-6-22:

 Group Name to VLAN Mapping Table Page Screenshot 

 

The page includes the following fields: 

Object 

Description 

To delete a Group Name to VLAN map entry, check this box. The entry will be 

deleted on the switch during the next Save 

 

Delete 

A valid Group Name is a string of atmost 16 characters which consists of a 

combination of alphabets (a-z or A-Z) and integers(0-9), no special character is 

allowed. Whichever Group name you try map to a VLAN must be present in 

Protocol to Group mapping table and must not be preused by any other existing 

mapping entry on this page. 

 

Group Name 

Indicates the ID to which Group Name will be mapped. A valid VLAN ID ranges 

from 1-4095. 

 

VLAN ID 

 

Port Members 

A row of check boxes for each port is displayed for each Group Name to VLAN ID 

mapping. To include a port in a mapping, check the box. To remove or exclude 

the port from the mapping, make sure the box is unchecked. By default, no ports 

are members, and all boxes are unchecked. 

 

146 

 

Содержание MGSD-10080F









































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды