10. Create a route,
ext-br
, with pattern “
2XX
” and number of digits stripped “
0
”, no prefix.
stn-out
, containing route
pstn
only.
ext-br
.
extension, and select
ext-all
IP trunk with ID
100
; password
hq-secret
; do not select DID, and select
ergroup of privilege.
configuration. For usergroup
staff
, choose
pstn-out
as outbound routegroup
r
pstn1
, choose
to-br
as outbound routegroup for
100
in Associated Trunks, and select
utility
ser Group; while for usergroup
utility
, only select
staff
in Reachable User Group.
ice.
onfiguration steps in B-BR:
oups named
staff
,
utility
, and
ext-all
.
ext-all
.
.
Create a user account for each staff and assign it to usergroup
staff
.
unt named
public
and assign it to usergroup
utility
.
extension.
.
Assign extensions of staff phones to corresponding users.
sign all extensions of utility phones to share the same user,
public
.
digits stripped “
1
”, no prefix.
-hq
, with pattern “
9001408.
” with number of digits stripped “
7
”, prefix “
9
”.
ts stripped “
0
”, no prefix.
, containing route
pstn
only.
2. Create a routegroup,
to-hq
, containing routes
pstn-hq
and
ext-hq
.
N trunk with ID
1
, port
1-2
, do not select any DID of extension, and select
ext-all
as
D
100
pointing to
64.1.0.1
port
5060
; password
hq-secret
; do not select
DID, and select
staff
as the usergroup of privilege.
sergroup configuration. For usergroup
staff
, choose
pstn-out
as outbound routegroup
y
e.
11. Create a routegroup,
p
12. Create a routegroup,
to-br
, containing routes
pstn-br
and
13. Create a PSTN trunk with ID “
1
”, port “
1-4
”, do not select any DID of
as the usergroup of privilege.
14. Create a dynamic peer S
staff
as the us
15. Return to usergroup
fo
in Reachable U
16. Reload the IP PBX Serv
C
1.
Create usergr
2. Add
staff
and
utility
in the Reachable User Groups of
3
4.
Create an additional user acco
5.
Create a device for each physical phone and designate an
6
7.
As
8.
Create a route,
pstn
, with pattern “
9Z.
” with number of
9.
Create a route,
pstn
10. Create a route,
ext-hq
, with pattern “
1XX
” and number of digi
11. Create a routegroup,
pstn-out
1
13. Create a PST
the usergroup of privilege.
14. Create a SIP trunk with I
15. Return to u
for
pstn1
, choose
to-hq
as outbound routegroup for
100
in Associated Trunks and select
utilit
in Reachable User Group; while for usergroup
utility
, only select
staff
in Reachable User Group.
16. Reload the IP PBX Servic
98