60fps Full HD Vandalproof IR IP camera
ICA-5260V
69
App
device wants to be accessed from the WAN, its IP
he port forwarding or Virtual Server function of
Therefore, user could
s to configure
Manua
as follows:
1. Assign a local/fixed IP address to your device
2. Access the Router with Your Web browser
3. Open/Configure Virtual Server Ports of Your Router
1. Assign a local/fixed IP address to your device
The device must be assigned a local and fixed IP Address that allows it to be recognized by the
router. Manually set up the device with a fixed IP address, for example,
192.168.0.100
.
2. Access the Router with Your Web browser
The following steps generally apply to any router that you have on your network. PLANET
WNRT-620 is used as an example to clarify the configuration process. Configure the initial settings
of the router by following the steps outlined in the router’s
Quick Installation Guide
.
If you have cable or DSL service, you will most likely have a dynamically assigned WAN IP address.
‘Dynamic’ means that your router’s WAN IP address can change from time to time depending on
your ISP. A dynamic WAN IP address identifies your router on the public network and allows it to
access the Internet. To find out what your router’s WAN IP address is, go to the
Status
screen on
your router and locate the WAN information for your router. As shown on the following page the
WAN IP address will be listed. This will be the address that you will need to type in your web browser
to view your camera over the Internet. Be sure to uncheck the
Reset IP address at next boot
button at the top of the screen after modifying the IP address. Failure to do so will reset the IP
address when you restart your computer.
endix E: Configuring Port Forwarding
Manually
The device can be used with a router. If the
ddress needs to be set up as a fixed IP address. T
a
router also needs to be set up. This device supports UPnP traversal function.
use this feature to configure port forwarding of NAT router first. However, if user need
port rw
fo arding manually, please follow the steps below:
lly installing the device with a router on your network is an easy 3–step procedure
