60fps Full HD Vandalproof IR IP camera
ICA-5260V
Using DHCP, IP camera will get all the network parameters
DHCP
automatically.
Please type in IP address, subnet mask, gateway, and DNS
Static IP
manually.
IPv6 Assignment
IPv6 is a newer numbering system that provides a much larger
address pool than IPv4, which accounts for most of today’s
Internet traffic. You can set up IPv6 manually by keying in
Address, Gateway, and DNS, or enabling DHCP to assign the
IP automatically.
User may need to assign a different port to avoid conflict when
setting up IP assignment.
(1) Web Page Port: set up web page connecting port and video
transmitting port (Default: 80)
Port Assignment
(2) RTSP Port: setup port for RTSP transmitting (Default: 554)
(3) RTP Start and End Port: in RTSP mode, you may use TCP
and UDP for connecting. TCP connection uses RTSP Port
(554). UDP connection uses RTP Start and End Port.
UPnP
This IP camera supports UPnP. If this service is enabled on your
computer, the camera will automatically be detected and a new
icon will be added to “My Network Places.”
Note: UPnP must be enabled on your computer.
34
