Planet Lighting Phantom, Руководство по установке

Страница: 17 / 19

5.0 OPERATING INSTRUCTIONS
5.1 GENERAL OPERATION
The general operation sequence is as follows:
1.
Switch light on
2.
Adjust dimming as required
3.
Using the handle, position the head of the fitting and direct the light at the target location
4.
Perform task
5.
Reposition for other tasks if required
6.
Turn light off after use
!
WARNING: Take care that you DO NOT direct the lighting beam into your eye’s (or any-
one elses) during operation. Looking directly into this light could cause permanent eye dam-
age.
5.1 SWITCH AND DIMMING OPERATION
The Products lighting functions are controlled via the use of the membrane switch located on the
head of the fitting, on the opposite side to the handle. The controls (shown below) offer a simple on/
off switch and an additional up/down dimming control. The dimming control allows the user to set
the brightness level of all LED’s in the head together.
POWER - ON/OFF
DIM - DOWN
DIM - UP