5 - 6
7 - 8
HLS | Wiring Installation Guide
Step 5: Temporarily connect LED driver
1. Connect the drivers positive output to the red puck wire.
2. Connect the drivers negative output to the black return wire
from the end puck.
Step 7: Insert Pucks
1. Push the led puck into the tube
2. Using the alignment tool, ensure the long r
efl ector axis is
parallel to the rail.
Step 8: Confi rm system is working
1. Apply power to the driver.
2. Check that
ALL
pucks are illuminated.
• With pucks installed into the handrail, the system is
ready for extended operation.
Step 6: Confi rm system is working
1. Apply power to the driver.
2. Check that
ALL
pucks are illuminated.
•
Only
run pucks long enough to confi rm
illumination.
