3.2 Uno Housing Installation
!
DANGER: Risk of electric shock – Ensure that Mains Power AC is turned OFF and disconnected BEFORE attempting
installation of the Uno housing and BEFORE handling AC Plug Board(s) or connectors.
!
CAUTION: Risk of injury and product damage – Ensure that the Uno Panel is firmly secure on the rail with your chosen
bracket solution.
Your Uno unit is Plug & Play and has a toolless design for easier installation. Follow the steps and diagrams for each Uno unit
you are installing ensuring you observe the mentioned cautions.
!
CAUTION – Risk of injury and
product damage.
Ensure that the Uno Panel is firmly secure on the rail
with your chosen bracket solution.
3. Check the Uno
housing is secured
to the Uno Panel
as pictured.
1. Insert the Uno housing into a
mounting block on the Uno Panel
2. Secure the Uno with 2 x short drop nose pins, rotating
and locking each pin into place at 90 degrees as shown
1. Mounting your Uno housing - Instructions:
»
Step 1: Insert the bottom of the Uno housing into the mounting block on the Uno Panel.
»
Step 2: Align the top holes of the housing with the drop nose pins on the Uno Panel. Place the Uno housing through the drop
nose pins until it is flush against the Uno Panel and secure by rotating and locking each pin.
»
Step 3: Check the Uno unit is secure on the Panel.
View this manual live
on our website.
Sea Cage Lighting System Manual
ver.13082021-00
Page 24
Please note the information in this document
is subject to change without notice.
