3.0 Installation
3.1 Uno Panel Assembly
!
DANGER: Risk of electric shock – Mains AC Input Connection by Authorised Service Personnel ONLY. Ensure that Mains
Power AC is turned OFF and disconnected BEFORE attempting installation and before handling the AC Plug Board. Ensure
that all unused plug board outlets have Ingress Protection Caps securely fitted.
The Uno Panel is shipped flat-packed and requires assembly. Use the following steps and diagram for assembly. All parts for
assembly are provided and include:
• 8 x screws
• 8 x short drop nose pins (Uno)
• 2 x long drop nose pins (AC Plug Board
)
1. Insert 2 x short drop nose
pins per Uno mounting block.
3. Secure the bottom bracket with 2 x
screws per Uno mounting block.
4. Remove plug board cover and insert
AC Plug Board(s). Ensure Ingress
Protection Caps are fitted securely and
replace the plug board cover securing
with the drop nose pins.
2. Insert 2 x long drop nose
pins for plug board cover.
Uno mounting
block
(4 in total per
Uno Panel)
!
DANGER – Risk of Electric Shock.
Mains AC Input Installation by Authorised
Service Personnel ONLY. Ensure Mains
power is OFF and disconnected before
handling plug board. Ensure Ingress
Protection Caps are securely fitted.
NOTE! Ensure
drop nose pins
are inserted in the
correct orientation
to enable correct
locking function.
See open / insert
position (right).
Drop nose pin in
open / insert position
THIS WAY
UP
Pictured: Uno Panel assembly (exploded view).
View this manual live
on our website.
Sea Cage Lighting System Manual
ver.13082021-00
Page 20
Please note the information in this document
is subject to change without notice.
