Uno Panel Assembly – Instructions:
»
Step 1: Insert 8 x short drop nose pins into the top of the Uno Panel in the holes provided. There are 2 x drop nose pins per
Uno mounting block. Ensure drop nose pins are inserted in the correct orientation to enable correct locking function.
»
Step 2: Insert 2 x long drop nose pins into the AC Plug Board holes on the Panel. This will secure the plug board cover.
»
Step 3: Use the provided 8 x screws to secure each of the 4 Uno bottom mounting blocks as shown, using 2 screws per
mounting block.
»
Step 4:
If you are NOT inserting the AC Plug Board into the Uno Panel at this time: secure the plug board cover with the drop
nose pins.
If you are inserting the AC Plug Board during this assembly: with the plug board cover removed, insert the plug
board(s), ensuring that Ingress Protection Caps are securely fitted on the plug board outlets then replace the plug board
cover securing with the drop nose pins.
!
DANGER – Risk of Electric Shock.
Mains AC Input Installation by Authorised
Service Personnel ONLY. Ensure Mains
power is OFF and disconnected before
handling plug board(s). Ensure Ingress
Protection Caps are securely fitted.
AC Plug Board model: UP1-PB-2 (2 x 2 socket)
AC Plug Board model: UP1-PB-4 (1 x 4 socket)
Ensure Mains power is OFF and disconnected
before handling plug board(s) and that Ingress
Protection Caps (IPCs) on unused outlets are
securely fitted.
Pictured: AC Plug Board model options (expanded view). Plug boards are placed within the Uno Panel behind the
removable plug board cover.
View this manual live
on our website.
Sea Cage Lighting System Manual
ver.13082021-00
Page 21
Please note the information in this document
is subject to change without notice.
