Planer ShipsLog 3, Руководство пользователя

Страница: 14 / 47

14
Operation
The data logger is in delayed start mode and will begin
logging at the time specified during
set up .
The logger is in Push-to-start mode and will begin logging
when the button is pressed.
When the display has been disabled, see Setting up the
logger , pressing the button will momentarily show 'log' to
indicate the unit is functioning correctly.
A reading with no triangle indicates the latest reading.
A reading with an upwards pointing triangle indicates this is
the maximum recorded reading.
A reading with an downwards pointing triangle indicates this
is the minimum recorded reading.
'Prob' followed by a letter or number indicates that the probe
is not connected or has an error. Check the connections.
The logger is in its stopped state.
2.4.2
LED status indicators
The data logger is fitted with two LEDs. One LED flashes red to indicate an alarm
condition. The other LED flashes green to indicate it is not in alarm condition.
Possible LED states are shown in the table below.
19
19