Planer kryo connect, Начало работы

Страница: 8 / 23

Getting Started
6
Connecting to the network
The only connection required from the unit to the network is the Ethernet
cable.
The unit is designed for connection to information technology
equipment compliant with EN60950 or its equivalent. Use with
other equipment may compromise the safety of the device. The
unit should only be connected to an Ethernet LAN internal to the
building.
It is advisable not to permanently install the kryo-connect unit
until you have completed the network connection and reviewed
the online documentation as there may be additional installation
requirements that need to be considered.
•
Locate the RJ45 network connector located in the end panel of the web
server.
RJ45 network connector
If you are connecting the unit to a network hub you will need a standard
patch cable but if you are connecting directly to a PC with an Ethernet
connection you must use a crossover patch cable. These cables are
available from Planer plc.
•
Connect one end of the appropriate cable to the unit and the other end to
the network hub or PC as shown below taking care not to touch the pins
of the connectors. NB. The length of the cable should be at least 2.5m
and less than 100m.
Standard Patch Cable
(PPL No. AC008795)
Crossover Cable
(PPL No. AC008796)
Client
PC
Hub