008-0159-00A
5
2013
Wood dowels tacked onto the adhesive
4.
Hang the touchscreen onto the display with the help of another person. Swing the bottom of the
touchscreen out slightly at a small angle to prevent the touchscreen from sticking to the display.
5.
Center the touchscreen using the lit display’s active area as a guide.
6.
Once satisfied with the touchscreen position, remove the liner completely from the VHB tape and then
remove the dowels starting from the top. Ensure that the touchscreen does not move while removing
the dowels.
7.
Press on top of the tape location to bond the top of the touchscreen to the top of the display.
8.
Remove the dowels on both sides of the touchscreen. Ensure that the touchscreen does not move while
removing the dowels. Press on top of the tape location to bond the touchscreen to the display.
9.
Remove the bottom dowels and press on top of the tape location to bond the touchscreen to the
display.
10.
Install the two bottom brackets to secure the bottom corners of the touchscreen.
11.
At this point, the touchscreen is mechanically installed.
