008-0159-00A
7
2013
9.
Remove the bottom dowels and press on top of the tape location to bond the touchscreen to the
display.
10.
Install the two bottom brackets to secure the bottom corners of the touchscreen.
Location of bottom
brackets to be installed
11.
At this point, the touchscreen is mechanically installed.
USB and Power Hook-up
1.
Using the display service kickstand, swing out the display. If you are only using the mount, make
sure you have at least 1” clearance to connect the USB and power.
2.
Plug in the 5V, 4A Power supply connector to the touchscreen power connector.
USB and Power Connection to the touchscreen
Power
USB
