23
Using PC
1. Turn on the PDP monitor and press input selection button of remote control.
2. Use
button to select Analog RGB and then press button.
(If PC output is set to Digital, select Digital RGB.)
3. This product does not support Plug & Play function. When setting the monitor, select standard monitor
type and then use it.
4. You can set PC output mode to VGA (640 X 480)/ SVGA (800 X 600)/ XGA (1024 X 768). In the mode
more than SXGA (1280 X 1024), "Out of Range" message appears. When connecting to PDP monitor,
be sure to change into less than XGA mode. Please refer to page 52 for the modes that PDP supports.).
