Planar C3215 Clean Screen II, Руководство пользователя

Страница: 10 / 60

Clean Screen II Mounts and Accessories P/N
12" wall mounted swing arm M3S12
Flush wall mount system (for head and keyboard cabinet) M3WC0
Flush wall mount system (head only) M3FHM
Roll stand only M3POLE
Roll stand with UPS M3POLE-PS2
IS Manager’s Kit C3DOC-2
IS Manager’s Kit, TOUCH C3DOC-TS
Keyboard cabinet with keyboard and mouse M3W00
External floppy drive C3FLOP
Safety Instructions
Your Planar Clean Screen II PC has been designed, assembled, and inspected to ensure both the
highest quality product and greatest level of safety for the user. To maintain both quality and
safety, you must follow the instructions in the manual and the following safety guidelines.
1. Read the safety and installation guidelines carefully.
2. Keep the manual handy for future reference.
3. Install and use the Clean Screen II only on a sturdy surface and in stable surroundings.
4. Use the Clean Screen II in dry environments only.
5. Do not block vents or other slots on the Clean Screen II housing.
6. Use only the power supply module included with the Clean Screen II.
7. Use and maintain the safety ground plug set (power cord) included with the unit.
8. After the Clean Screen II has been installed, secure all electrical cords out of the way to pre-
vent the unit from being pulled off the table or other accidental damage.
9. Turn off and unplug the Clean Screen II before removing the back housing to access internal
user serviceable parts.
10. Avoid placing the Clean Screen II or any of its cables on or near heat sources.
11. Clean Screen II and its power supply meet the UL2601 standard for cleaning in a hospital
environment. Please see Chapter Six: Care and Cleaning for details.
12. Before cleaning, or if the unit becomes wet for any reason, it is always best to disconnect
the unit from its power source.
13. Practice caution when moving the Clean Screen II to a different location. Use original pack-
aging whenever possible.
14. If the Clean Screen II does not power-up when the power is switched on, refer to the
Troubleshooting section of this manual in Appendix C and follow the directions. If the Clean
Screen II still does not work, immediately disconnect it from its power source and contact a
qualified service technician.
If this device is used in a medical facility, any application software used on the
Clean Screen II PC must be in the language of the user.
Installation Guide
ix
CS II Manual LAYOUT#2304 3/25/99 11:16 AM Page ix